Call for Inquiry ! +886(7)721-3376 (Ms.Sun)|customer.en@goodware.com.tw

CONSTRUCTION ISSUE

HOME > FAQ > CONSTRUCTION ISSUE

Install Crown Molding Step by Step

Install Crown Molding Step by Step Crown molding encapsulates a large family of moldings, which are designed to gracefully flare out to a finished top edge. Crown molding is typically applied along the seams where ceiling meets wall. Almost people used to decorative their house themselves so now you can follow the step by step guide to install [...]

Categories: CONSTRUCTION ISSUE|Tags: |Comments Off on Install Crown Molding Step by Step

How to install ceiling tiles?

To install a 3 × 5 grid ceiling frame, for example, to prepare 15 ceiling tile products (WR-8100), is expected to install on the ceiling of the wooden frame. First measure, compared to the size of the product and skeleton grid is consistent, if the error and then adjust. Installation order to the second row as [...]

Categories: CONSTRUCTION ISSUE|Tags: |Comments Off on How to install ceiling tiles?

How to install crown molding?

 Use molding to mark the position and size  If it is Cement wall, we suggest fix plywood first (the plywood thickness: thicker than 9mm). And then fix molding on the plywood. Mark the position and size on the wall Use tool to cut the angle and length you need, make sure you've cut longer than [...]

How to install companion molding?

1 Measure the central position of each line in advance (Refer to the red arrows) 2 Place four moldings (take GM-0012) in the very center of each line as below 3 Place the corner moldings around the corners of the wall( take the dark GM-0013) 4 Tailor the GM-0011 to fill the gaps of the ceiling

Categories: CONSTRUCTION ISSUE|Tags: , , , |Comments Off on How to install companion molding?

Coping moldings for corners

Coping moldings for corners is the process of cutting the end of a molding to mimic the profile milled into its face. Coped corners are used where one piece of crown molding meets another at an inside corner. Cut crown molding at a 45-degree angle to prepare for coping moldings for corners. Outside corners are mitered, [...]

Categories: CONSTRUCTION ISSUE|Tags: , |Comments Off on Coping moldings for corners

How to Cut Crown Molding Corners?

As we know the hardest part of installing crown molding is Cutting Crown Molding Corners. You can’t do it like any other trim pieces because the molding sits at an angle between the wall and the ceiling. Before cutting moldings some questions may come to your mind,which exactly direction should cut the molding? Which way should [...]

Categories: CONSTRUCTION ISSUE|Tags: , , |Comments Off on How to Cut Crown Molding Corners?